This is a very good reproduction of the original grommets used to mount the wiper motor to the firewall on various GM models. This reproduction includes the original type steel sleeve built directly into the grommet. Sold as a set of 3…
OER® reproduction of the original grommet and sleeve unit where the accelerator rod fits into linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will keep your throttle rod from…
RimBlades is our original wheel protection product, offering protection from minor curb scratches while maximizing the style of your rims. Priced as our mid-level line, RimBlades come in a variety of colors and are easily applied without…
Replacement Cover
3" X 5 5/8" Single Bail Cover
For use with either Power or Manual Brake Systems
Gasket not Included
Cover is in Chrome and the bail is in black
…
Repair torn and worn-out boots of suspension tie rod ends - without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5-point sealing action. Choose from four sizes and round or…
OER® reproduction of the original inner rear view mirror mounting screw for various 1958-76 GM models. Each screw is chrome plated as original. Applications: 1967-68 Chevrolet Camaro - 8" Mirror 1969 Chevrolet Camaro - 10" Mirror…
Featuring the iconic Carhartt logo and a custom run "brown" reflective finish, this custom patterned sunscreen not only helps reduce the interior temperature when it's hot outside, it also helps protect the vehicle interior from damaging…
1965-91 GM Truck; 1978-88 A/G-Body; Door Lock Knob; Chrome; Reproduction Reproduction of the interior lock knobs originally installed on most standard interiors for 1970-90 Chevrolet, Buick, Oldsmobile, and Pontiac models. Also correct…
1977-93 Door Lock Actuator With Bracket Fits RH Side OER® reproduction door lock actuator assembly with correct mounting bracket for various GM models. Will replace burned out originals and give years of lasting service. Sold…
Universal fit bracket to mount the proportioning valve on the LH side of the master cylinder towrds the driver side fender. Will fit most aftermarket 7-11" boosters with a GM style master cylinder. Mounting hardware is provided. …
This seal presses on the pinchweld lip on the body and fits either the drive or passenger front doors. Our product is made from the original specs and from high quality ozone resistant materials to fit your vehicle.Front Door Weatherstrip…
This OER® Authorized reproduction steering coupling joints are required to connect the steering column box to the steering column. Coupler Specifications: Shaft type: 3/4" coarse spline w/ flat at bolt head side Spline Count: 15 Total…
OER® reproduction of the original door bumpers for 1964-86 C/K AND 1987-91 R/V model Chevrolet and GMC pickup trucks. Includes a set of four rubber bumpers to replace the bumpers on both doors. Manufactured as original for a perfect…
OER® reproduction of the original OEM style steel coil bracket for use on various GM small block engines. Manufactured from precision stamped and formed steel as original, each bracket is produced to original specifications and includes…
This 11 piece set includes the o-rings, gaskets, seals, hardware and washers you will need to install a reservoir on your saginaw power steering pump. This set has unfinished hardware that are designed to be used with a painted…
OER's® revolutionary formula provides 40% more coverage than standard dyes and lacquers, and actually penetrates and molecularly bonds to the surface to permanently seal in the color. Dries to the touch in 45 seconds, forms a complete…
OER® reproduction of the original headlamp mounting buckets and headlamp mounting rings designed for use on various GM vehicles including 1958-72 Chevrolet and GMC pick up models. Each headlamp bucket is manufactured in stamped steel…
Ready-Fit covers could actually be called "semi-custom" since they are designed to provide a very good fit using incremental sizing and a hatchback silhouette.
…
Product Features:
7 inch Steel round housing
Crystal clear glass lens
No prisims in the lens to block the light; an absolute clear lens
Plugs directly into stock harness
Replaceable bulb assembly
Fluted parabolic pattern on…
OER® reproduction headlamp mounting bucket which is designed to secure the headlamp sealed beam in position. This buckets attaches to the headlamp housing using adjustment screw and nut assemblies (screws and nuts not included)…
This handsome stainless steel clamp can be used to hold the two heater hoses to the inner fender well on various vehicle models. A perfect upgrade for the unsightly original equipment style clamp or to add a custom touch to your engine…
3/4"-20 w/1-1/16" hex head spindle nut and plated 1/8" x 1-1/2" cotter pin for securing drum or rotor to spindle. Kit contains one nut and one cotter pin. 2 kits required per vehicle. Applications:Buick: 1978-87 Regal 1975-79 Skylark…
Radio Installation Nuts Correct mounting nuts used to hold the radio in place on most GM applications. Fits radios that use 7/16"-28 thread x 1/8" thick flat style hex nuts. …
Don't let the good looks fool you. These seat covers are tough as nails with heavy duty, firm-hand Carhartt duck weave fabric and triple stitched main seams. Custom patterned for a perfect fit. Available for front, middle and rear rows.
…
OER®'s revolutionary formula provides 40% more coverage than standard dyes and lacquers, and actually penetrates and molecularly bonds to the surface to permanently seal in the color. Dries to the touch in 45 seconds, forms a complete…
Correct OER® reproduction of the original turn signal lever knob designed to fit the various GM models. This reproduction knob is manufactured to exact factory specifications. Will replace damaged or missing original know. Designed for…
Reproduction power steering pulley washer and nut. This lock-nut and washer set is needed to secure the power steering pulley to the pump. Measures 9/16" - 18. Pre-packaged in OER polytube. 1967-75 Camaro 1967-75 Firebird 1962 -75 Chevy…
OER's® revolutionary formula provides 40% more coverage than standard dyes and lacquers, and actually penetrates and molecularly bonds to the surface to permanently seal in the color. Dries to the touch in 45 seconds, forms a complete…
Product Features:
7 inch Steel round housing
Crystal clear glass lens
No prisims in the lens to block the light; an absolute clear lens
Plugs directly into stock harness
Replaceable bulb assembly
Fluted parabolic pattern on…
Product Features:
7 inch round Thermal-heat resistant composite housing
Crystal clear glass lens
No prisms in the lens to block the light; an absolute clear lens
Plugs directly into stock harness
Replaceable bulb…
Product Features:
7 inch round Thermal-heat resistant composite housing
Crystal clear glass lens
No prisms in the lens to block the light; an absolute clear lens
Plugs directly into stock harness
Replaceable bulb…
Spark Plug; ACDelco GM Original Equipment Conventional Spark Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These Conventional Spark Plugs are designed for reliability and efficient…
1957-72 GM; Multi-Purpose Relay; Various Models; Horn; Power Windows Reproduction of the multi-purpose relay designed for use with various 1957-66 GM passenger car, and 1967-72 Chevrolet and GMC truck models. This relay is considered an…