Your shopping cart is empty!
DRIVEN BY CARE
-
My Account Sign In / Register
×
Select Your Vehicle to Shop for the Correct Parts:
Show More Filters
Auto Metal Direct is a team of true car guys with years of experience in sheet metal reproduction, car restoration and paint/body work. We believe that quality is not subjective! Our mission is to provide the best customer experience for the Ford, Mopar and GM classic car markets - both in products and in service.
Our panels are made from proper gauge steel and include all correct-as-original clips, tabs, flanges, bends and seams. Each time a prototype body panel comes off of a new tooling, we test fit it on a car. The marked up prototype is then used to change and improve the tools, and a new prototype is produced. This procedure might be repeated multiple times but, once the part is finally approved, you can be assured of a quality part.
1-36 of 1783 results for Auto Metal Direct : All Productsgo
Sort by
Show
Show results for
Refine By
Availability
On Sale
Condition
Price
Under $10 (34)$10 to $25 (59)$25 to $50 (140)$50 to $100 (268)$100 to $250 (455)$250 to $500 (401)$500 & Above (426)
$ to $ go
Manufacturer
Show Less Filters
Model: 3928128
Condition: NEW
You will need this seal kit if your windshield or back glass fits directly onto the window frame and does not use a rubber seal/gasket. We offer kits in both 3/8" and 5/16" diameters with length about 15'. Each kit contains two rubbere…
Model: 3929341
Condition: NEW
1/2" thick hood insulation pad for all 67-76 A bodies. This insulation pad, like the factory, insulates heat transfer to the hood and well as reducing sound/noise. Created in CAD and die cut. This piece has perfectly cut edges…
Model: 3928578
Condition: NEW
Complete hardware kit for installing the front valance on a 1968-69 Dodge Charger. Includes correct bolts and j-nuts.
This fits:
1968 - 1969 Dodge Charger
…
Model: 3928865
Condition: NEW
Reproduction arm rest base for the 66-70 Dodge / Plymouth B-Body. Correct as original. Each arm rest base has an OE quality chrome finish.
Fits LH (driver) or RH (passenger) side. Sold individually.
This fits:1966 - 1970 Dodge Charger…
Model: 3932693
Condition: NEW
Finish off you windshield installation with a new set of AMD moldings. Finding a Cuda or Challenger lower windhield molding without scratches from the wipers is a real challange. Our moldings are made of stainless steel like OE and fit the…
Model: 3931826
Condition: NEW
AMD OE replacement fuel tanks are stamped from high quality rust resistant steel which is lead/tin plated inside and out. Each tank features the correct shape, size, holes, ribs and curvature, like original. All tanks are pressure tested…
Model: 3931814
Condition: NEW
When replacing your muscle car's quarter panel, you'll need trunk floor extensions. Auto Metal Direct trunk floor extensions are direct replacements for the originals. They're made with high-quality steel and are EDP coated for excellent…
Model: 3931744
Condition: NEW
These fender patch panels from Auto Metal Direct are manufactured from high-quality steel and are black EDP coated to resist rust, making them perfect for your restoration project. They're designed to fit the lower rear area of the…
Model: 3930270
Condition: NEW
This fits:
1970 - 1974 Dodge Challenger
…
Model: 3927740
Condition: NEW
This fits:1966 - 1970 Dodge Charger 1966 - 1970 Dodge Coronet 1968 - 1970 Dodge Super Bee 1966 - 1970 Plymouth Belvedere 1967 - 1970 Plymouth GTX 1968 - 1970 Plymouth Road Runner 1966 - 1970 Plymouth Satellite 1970 Plymouth Superbird …
Model: 5113915
Condition: NEW
Fits all B Bodies from 1966 through 1970, Dodge and Plymouth, Charger, Roadrunner, Superbee, GTX etc. These torque boxes are designed to add strength to your Mopar unibody in several critical areas. The factory added OEM torque boxes on…
Model: 5113798
Condition: NEW
Reproduction windshield molding clip set for the 71-74 Dodge Challenger and Plymouth Barracuda. Made like OE. This kit includes all the necessary clips needed to properly install the front windshield molding.…
Model: 5113725
Condition: NEW
Parking Brake Release Rod Bushings - 71-74 Dodge Plymouth B&E BodyEnsure the proper functioning of your 1971-1974 Dodge Plymouth B&E Body vehicle's parking brake system with our Parking Brake Release Rod Bushings. Designed to…
Model: 3933621
Condition: NEW
It is often easier to replace a top skin than to repair rusted areas. If you have rust under a vinyl top this piece can be a real time saver. Made to OE speicifications, this skin covers the entire top of the car and mates to the A…
Model: 3932504
Condition: NEW
AMD bumpers are made from heavy gauge steel and feature OE quality chrome finish. All parts feature, depending on application, correct holes for turn signals or back-up lamps. Installation is fast and easy as all parts are designed to be a…
Model: 3932454
Condition: NEW
Nice reproduction of the moldings separating the vinyl top from the painted body panels. Does not include clips.
This fits:1970 - 1974 Dodge Challenger …
Model: 3932099
Condition: NEW
Inner wheel houses are often rusted or bent on the lower edges so it makes sense to replace them when working on the outers. Replacing or repairing inners is also a good idea when replacing a trunk floor. Our inner houses…
Model: 3930857
Condition: NEW
One of our best selling items. Fits between end of quarter panel and rear valance panel. Always rusted or damaged, you'll need these pieces when replacing quarter panels, quarter panel patchs and/or a rear valance panel.
This…
Model: 3930856
Condition: NEW
One of our best selling items. Fits between end of quarter panel and rear valance panel. Always rusted or damaged, you'll need these pieces when replacing quarter panels, quarter panel patchs and/or a rear valance panel.
This…
Model: 3930534
Condition: NEW
This fits:
1970 - 1974 Dodge Challenger
1970 - 1974 Plymouth Barracuda
…
Model: 3930070
Condition: NEW
This fits:
1971 - 1974 Dodge Challenger
1971 - 1974 Plymouth Barracuda
…
Model: 3928622
Condition: NEW
Fits in area below corner of the windshield. Is part of 379-1570-R, lower windshield corner/cowl patch set but can be purchased separately and is usually combined with 375-1570-L/R, A pillar/ windshield post which will give more coverage…
Model: 3928384
Condition: NEW
This fits:1966 - 1967 Dodge Charger 1965 - 1967 Dodge Coronet 1965 - 1967 Dodge Dart 1965 - 1967 Plymouth Barracuda 1965 - 1967 Plymouth Belvedere 1967 Plymouth GTX 1965 - 1967 Plymouth Satellite 1965 - 1967 Plymouth Valiant …
Model: 3928003
Condition: NEW
This fits:
1967 - 1969 Dodge Dart
1964 - 1969 Dodge Polara
1967 - 1969 Plymouth Barracuda
1967 - 1969 Plymouth Valiant
…
Model: 3930765
Condition: NEW
Use when replacing a trunk floor and/or tail light panel. The bottom section where the panel attaches to the trunk floor is often rusted. It's smarter to replace the part rather than make repairs.
This fits:
1970 - 1973 Dodge…
Model: 3930406
Condition: NEW
Covers the lock mechanism inside the trunk on 1970-71 Barracudas. Often missing or damaged, our shield is a correct reproduction of the original.
This fits:1970 - 1971 Plymouth Barracuda …
Model: 3929866
Condition: NEW
No restoration is complete without attaching this small item to your trunk floor. Don't waste time trying to save factory bracket(s) or straps. Our bracket matches the original E Body convertible version and will fit correctly right…
Model: 3928890
Condition: NEW
Required when replacing a trunk floor, this special bracket attaches to the trunk floor and allows for the spare tire to be held in place. Be sure order the studs,wing nuts and other brackets required to hold the tire down. …
Model: 3927607
Condition: NEW
Please Note: A-Body models require 10 clips & B-Body models require 12 clips.
This fits:1966 - 1967 Dodge Charger 1966 - 1967 Dodge Coronet 1967 Dodge Dart 1967 Plymouth Barracuda 1966 - 1967 Plymouth Belvedere 1967 Plymouth GTX 1966…
Model: 3927741
Condition: NEW
This fits:
1967 - 1976 Dodge Dart
1973 - 1976 Dodge Dart Sport
1971 - 1972 Dodge Demon
1967 - 1969 Plymouth Barracuda
1970 - 1976 Plymouth Duster
1971 - 1976 Plymouth Scamp
1967 - 1976 Plymouth Valiant
…
Model: 3918743
Condition: NEW
Don't ruin the look of your restoration by trying to reuse old, rusted hardware that not only looks bad, but could also be a safety hazard. AMD bumper mounting bolts are precision-manufactured from steel with a chrome finish to match up to…
Model: 3927779
Condition: NEW
Reproduction dome lamp lens for the 67-76 A-Body, 66-74 B-Body and 70-74 E-Body models. Each plastic lens features the correct shape, size and color, as original.
This fits:
1970 - 1974 Dodge Challenger Exc SE
1968 - 1974…
Model: 3933064
Condition: NEW
It is important this item be in good shape as it is a major component on the front of the body. Our crossmember has the same metal thickness as OE and the area holding the torsion bars will accept stock size bars as original.
This…
Model: 3929763
Condition: NEW
Reproduction OE style headlight switch for the 1968-69 Dodge Charger. Designed to fit and function like original.
This fits:
1968 - 1969 Dodge Charger
…
Model: 3928669
Condition: NEW
This fits:
1970 - 1972 Dodge Challenger
1966 - 1972 Dodge Charger
1966 - 1972 Dodge Coronet
1966 - 1972 Dodge Dart
1971 - 1972 Dodge Demon
1966 - 1972 Dodge Polara
1968 - 1971 Dodge Super Bee
1966 - 1972 Plymouth Barracuda
1966…