Split nylon flange bushings fit over clutch pedal cross shaft and inside cross shaft sleeve for clutch and brake pedals with 5/8" diameter cross shaft. These OER® reproduction bushings will help eliminate excessive side to side…
Engineered and manufactured for reliability, these alloy steel flywheel bolts are heat treated to grade 8 specifications for extra strength. Kits are complete with lock washers, where needed, and are black plated to help resist rust and…
This switch is designed to be used in conjunction with the OEM back-up lights and the Competition Plus 4-speed, Super Shifter 3 and the Master Shift 3-speed shifters.
Features:
Complete With Hardware
Easy Installation
Sold…
Hurst bolt-on shifter sticks are ideal for use in custom applications where a particular height or offset is required. These shifter sticks are constructed from high strength steel and are stamped with the Hurst name and has 3/8 - 16…
Specially designed for use with Super Shifter 3 utilizing separate reverse lock out lever. Complete with chrome trim plate and mounting hardware.
Features:
For Super Shifter 3
Chrome Trim Plate
Mounting Hardware
For Use…
MRG torque converter to flex plate bolts are forged from high quality steel and heat-treated for extra strength, these grade 8 fasteners are a must for all hi-performance applications. Black plated finish helps resist rust and corrosion…
1 1/16" (1.063") caps and is 3 7/32" (3.219") wide one direction and 1 1/16" (1.063") caps by 3 5/8" (3.622") wide the other
This is a very popular and handy u-joint when connecting mismatched driveline components. Use this…
DANA SPICER 5-460X
1310 to 1350 Series Combination Universal Joint. This is a very popular and handy u-joint when connecting mismatched driveline components.
Use this to connect 1310 series components to 1350…
Based on original Hurst blueprints, this HURST EQUIPPED emblem is an authentic reproduction of the one used on the late 60's muscle cars equipped with a factory Hurst shifter. Made of durable ABS plastic with 3M adhesive tape for mounting…
Available in either steel or nylon. These pit packs can be used on the Master Shift 3-speed, Competition Plus 4-speed and the V-Gate 2. Kit includes 7 steel bushings and spring clips.
Features:
Calms Vibrations
Easy…
MRG flex plate to crankshaft bolts are forged from high quality steel and heat-treated for extra strength, these grade 8 fasteners are a must for all hi-performance applications. Black plated finish helps resist rust and corrosion. Kits…
OER® reproduction of the original correct plastic torque converter cover (also called a flexplate/flywheel cover) for use with TH350 transmissions and a 153 tooth flex plate. Applications: 1969 Camaro V8 1970-73 Cam aro 307 Engine…
Highly polished triple chrome plated reproduction chrome shift knob from the 1960's. Fits models with a 3 speed or 4 speed transmission. This heavy-weight chrome knob will add style to your interior. Note: May be installed on aftermarket…
Designed for use with Hurst Indy Shifter, this popular economy boot comes with chrome trim ring and all mounting hardware.
Features:
Chrome Trim Plate
Mounting Hardware
Popular Economy Boot
Rubber Boot
1 Year Limited…
This is a reproduction speedometer driven gear, identified by both its tooth count and color. Replace your worn out, stripped or damaged original gear or simply use a different gear for speedometer correction when changing rear axle…
Nylon bushings are designed for street applications and eliminate most stick vibrations. These pit packs can be used on the Master Shift 3-speed, Competition Plus 4-speed and the V-Gate 2. Kit includes 7 nylon bushings and spring…
OER® reproduction of the original die-cut seal that slips over the bellcrank pivot studs and seals against the end of the bellcrank tube to prevent dirt and water damage. Applications 1967-69 Camaro 1963-67 Chevrole t/GMC Truck 1959-60…
OER® reproduction flywheel pan (also called a torque converter cover) for use with Powerglide and Torque Drive transmissions for various 1962-73 GM models. Manufactured from injection molded plastic.
Mounting hardware…
The B&M Unimatic is an ideal replacement for column shift vehicles, includes neutral safety switch, 5 foot cable and a boot and plate.
Features:
Ideal As Column Shift Replacement
Includes Neutral Safety Switch
Includes…
This kit includes all the internal wear parts to rebuild a Hurst Comp Plus Shifter. Service Parts Included: Set of 3 Shim Plates Shifter Stick Compression Spring Reverse Detent Plunger & Washer Reverse Detent Spring Selector Pin with…
These shift indicators are tailored with style that will keep you from guessing. Whether you crave the 3 speed, 4 speed, Ford AOD, or ADODE, ididit's shift indicators are perfect for your column. They have adhesive tape that clings to your…
Hurst Shifter Handle Insulators and Metal Wedge Lock Kit. These are made to exact specs as originals for a perfect fit. These are used to lock the shifter handle into the body of the shifter. They are always destroyed when taking apart the…
Hurst Shifters service part. Shift Handle Stiffener for Competition Plus and MasterShift. Secures shift handle to shifter assembly on units which do not have threaded mounts.
Features:Steel ConstructionHurst Replacement PartHigh…
The B&M Sport Shifter features, Neutral safety switch, backup light switch, lighted gear indicator and black T-Handle and cable. Fits Most 3 and 4 Speed applications.
Features:Base Trims For Custom FitNeutral Safety SwitchBackup Light…
Designed for large hole shifter installations. Complete with chrome ID plate and mounting hardware. Measures 7.75 in. x 8.75 in. and has 6 pleats.
Features:Works Well for Large Floor HoleChrome Trim PlateMounting HardwareRubber Boot1 Year…
These shift indicators are tailored with style that will keep you from guessing. Whether you crave the 3 speed, 4 speed, Ford AOD, or ADODE, ididit's shift indicators are perfect for your column. They have adhesive tape that clings to your…
Hurst Brushed Aluminum T-Handle With Button with 12v switch allows you to control a Roll/Control, nitrous or other accessories directly from your shifter hadle. Polished aluminum finish and bold HURST identification adds a stylish touch to…
Take a look at the new Hays Street 650 Clutch Kits. These single disc kits are an excellent upgrade from your stock clutch and designed handle highly modified naturally aspirated engines up to 650 horsepower. Designed as a true…
Kit includes back up light switch and hardware.
Features:Complete With HardwareEasy InstallationSold as a KitReplacement Parts90 Day Limited Warranty
Holley Performance Emission Code 5: This part is legal for sale or use on Emissions…