Precision Windshield Glass DL01105 GTN is a laminated green windshield engineered as an OE-style replacement to restore structural integrity, visibility, and occupant protection. The laminated construction prevents shattering, helps block UV and glare, and supports vehicle roof strength in a collision. Designed for direct replacement when matched to the correct part number, this windshield improves durability, reduces wind noise, and provides long-term reliability for restorations and routine maintenance.
Features:
- Laminated green glass construction for safety and mild solar/UV tinting.
- Engineered as an OE-style replacement—verify DL01105 GTN fitment for your vehicle.
- Holds together on impact to reduce injury risk and simplify cleanup.
- Helps maintain vehicle structural integrity and reduces wind noise.
- Durable, scratch-resistant surface for long-lasting clarity.
- Ideal for vehicle restoration, collision repair, or routine windshield replacement.
Installation / Application:
- Difficulty: 4/5
- Estimated time: 1–2 hours active; up to 24 hours adhesive cure time before driving
Instructions:
- Confirm correct part number (DL01105 GTN) and vehicle fitment before starting.
- Park vehicle on a level surface and disconnect the battery if airbags are present.
- Remove exterior and interior trim surrounding the windshield using trim tools.
- Carefully cut and remove the old windshield sealant using a removal knife, then lift out the old glass with suction cups.
- Clean the pinch weld and bonding surface thoroughly, removing old adhesive, rust, and contaminants; wipe with isopropyl alcohol.
- Apply primer to bare metal surfaces and to the windshield mounting flange per adhesive manufacturer instructions; allow to flash as directed.
- Load urethane adhesive into caulking gun and apply a continuous bead around the pinch weld per OEM bead profile.
- With two people and suction cups, set the new DL01105 GTN windshield into position, aligning clips and moldings; press firmly to seat into the adhesive.
- Reinstall trim and any removed components. Use painter's tape to hold the windshield in place if recommended.
- Allow adhesive to cure per adhesive manufacturer and vehicle manufacturer recommendations (typically a minimum of 1 hour for light movement, up to 24 hours before highway driving).
- Perform a water leak check and reinstall/verify any sensors, cameras, or wipers as needed.
About Precision Replacement Parts
Since 1986 Precision Replacement Parts has been a trusted name in the Automotive Glass Industry.
Our knowledge and experience in manufacturing millions of extruded and molded EPDM Rubber, PVC and HDPE based plastics, and various stamped and extruded metal products for the classic and late model industries has allowed Precision to expand our services into multiple product markets.
Along with our own USA based production facility, Precision also partners with 25 different manufactures worldwide with a reputation as a global leader supplying OEM and replacement products to a number of different industries. Our partnerships along with our own in-house manufacturing and fabrication capability gives Precision a unique position in helping to meet the expanding needs of customers everywhere, providing them with a sustained competitive advantage.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Jeep |
CJ5 |
1968 - 1975 |
| Jeep |
CJ6 |
1968 - 1975 |
| Jeep |
DJ5 |
1968 - 1975 |
