DMT 6pc kick panel insulation / sound deadener for 70-74 E Bodies
1970 70 1971 71 1972 72 1973 73 1974 74 AAR, Barracuda, Challenger, Cuda, TA
Included in this set;
1) the 2 larger pieces that tuck into the body behind the door hinge area with the matt face up against the body.
2) the middle lower pieces that are glued to the back of the kickpanels using 3M yellow weatherstrip adhesive
3) the 2 middle upper pieces that are sandwiched between the body and dash mounting brackets above each kickpanel. The matte face goes against the body.
Materials
3/4" & 1" matte faced, yellow fiberglass insulation
In 1977, at 15, my first car was a 70 Barracuda I bought for $600 from my dad's co-worker at Chrysler Huber Ave Foundry. Tawny gold, 318, hub caps. Before I could "legally" drive it it had headers and a 4bbl. Had a couple other Mopars after this as a young man.
25 years later it was time to get another Mopar. After looking for 2 years I found a 1971 B5 blue Challenger right here in Michigan. 318 and hubcaps again. This time it cost over 10x as much, $6500. Didn't take long to add wheels, new leaf springs, 340 6bbl, etc. A year or two later I decided to completely redo the car. Had it media blasted and painted B5 blue again BUT when I went to put it back together I found there were no good body gaskets sets for Mopars. The gasket making journey began.
In 2004 I first made a kit to redo my Non A/C heater box using a laser engraver/cutter that I had for another side business. I showed the guys on Moparts and quickly had a few orders. I obviously made all the gaskets for my car because I had all the parts for templates. Many parts fit the other E body models so I soon had all the E body gaskets, then more body style, then more heater box kits and the rest is history.
| Make | Model | Submodel | Years |
| Dodge | Challenger | T/A | 1970 |
| Dodge | Challenger | 1970 - 1974 | |
| Plymouth | Barracuda | 1970 - 1974 | |
| Plymouth | Cuda | 1970 - 1974 |
