Reproduction of the mounting hub used to attach the "S83 Rim Blow" and "S84 Tuff" steering wheels to the steering column on various 1970-76 Dodge or Plymouth models equipped with the optional Rim Blow or Tuff Wheel steering wheels. On the bottom side of the hub, the copper lower horn contact ring and wire are pre-installed with a heavy duty retainer circlip. Also included, are the 3 nuts that secure the steering wheel to the hub. Hub measures approximately 3" in height.
Dodge Applications
1970 - 1974 Dodge Challenger
1970 - 1976 Dodge Charger
1971 - 1974 Dodge Charger Special Edition
1970 - 1971 Dodge Charger R/T
1970 - 1971 Dodge Charger 500
1971 - 1971 Dodge Charger Super Bee
1971 - 1971 Dodge Coronet Custom
1970 - 1970 Dodge Coronet Deluxe
1971 - 1971 Dodge Coronet Brougham
1971 - 1971 Dodge Coronet Crestwood
1970 - 1970 Dodge Coronet R/T
1970 - 1970 Dodge Coronet 500
1970 - 1970 Dodge Coronet 440
1970 - 1970 Dodge Coronet Super Bee
1970 - 1976 Dodge Coronet
1970 - 1976 Dodge Dart
1973 - 1976 Dodge Dart Sport
1974 - 1975 Dodge Dart Sport 360
1971 - 1972 Dodge Dart Demon
1971 - 1972 Dodge Dart Demon 340
1973 - 1973 Dodge Dart Sport 340
Dodge Truck Applications
1978 - 1980 Dodge D100
1979 - 1980 Dodge D100 Panel
1978 - 1981 Dodge D150
1978 - 1980 Dodge D200
1981 - 1981 Dodge D250
1978 - 1980 Dodge D300
1981 - 1981 Dodge D350
1978 - 1981 Dodge Ramcharger
1978 - 1981 Dodge W150
1978 - 1980 Dodge W200
1981 - 1981 Dodge W250
1978 - 1980 Dodge W300
1981 - 1981 Dodge W350
Plymouth Applications
1970 - 1974 Plymouth Barracuda
1970 - 1971 Plymouth Belvedere
1970 - 1974 Plymouth Cuda
1970 - 1976 Plymouth Duster
1971 - 1971 Plymouth Duster 340
1970 - 1971 Plymouth GTX
1970 - 1975 Plymouth Road Runner
1970 - 1974 Plymouth Satellite
1971 - 1976 Plymouth Scamp
1970 - 1976 Plymouth Valiant
Plymouth Truck Applications
1978 - 1981 Plymouth Trailduster
Custom Fitment Tip: E-Body owners often use this hub during custom steering wheel installations to gain clearance between the driver and the wheel. This hub positions a Tuff Wheel or Rim Blow steering wheel approximately 3" off the column, whereas the original E-Body "crush can" part # 2950812 is taller, positioning the wheel approximately 4-3/4" off the column. Using the 3467186 on an E-body will allow for an additional 1-3/4" between the driver and the steering wheel.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
