855.444.6872 Contact Us Mon-Sat 10a-6p
DRIVEN BY CARE

Pypes Crossmember Back w/X-Pipe Exhaust System 66-74 Mopar B-Body Split Rear Dual Exit 2.5 in Intermediate And Tail Pipe Hardware Incl Muffler And Tip Not Incl Exhaust SMB10

Pypes Crossmember Back w/X-Pipe Exhaust System 66-74 Mopar B-Body Split Rear Dual Exit 2.5 in Intermediate And Tail Pipe Hardware Incl Muffler And Tip Not Incl Exhaust SMB10
Pypes Crossmember Back w/X-Pipe Exhaust System 66-74 Mopar B-Body Split Rear Dual Exit 2.5 in Intermediate And Tail Pipe Hardware Incl Muffler And Tip Not Incl Exhaust SMB10
$922.99 kt
NEWOut of stock with PYPES EXHAUST as of 04/24/2024
Model: 3957833
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.
OVERSIZE 3

Pypes Exhaust Systems are designed to deliver enhanced performance, provide extra punch in the passing lane and improve gas mileage. Fabricated using the highest quality materials, our smooth, seam-coated, 16 gauge, mandrel-bent, stainless steel pipe ensures maximum exhaust gas flow, which can significantly boost horsepower.

The stainless construction of our pipes and mufflers enables them to resist corrosion and extends the life of the system. Our mufflers are precision matched to deliver the ultimate in sound and performance. Pypes systems come complete with a pair of precision matched Pypes mufflers, correct tailpipes, cad plated clamps and hangers. These systems can be installed at home without any special tools.

Our Special X Crossover allows the rear pipe legs to run in the driveshaft tunnel in order to optimize ground clearance. Requires 18 inch muffler body for proper fit.
Features:

  • Exhaust Type: Dual
  • Exit Position: Dual Split Rear
  • Exit Style: Straight
  • Inlet Inside Diameter: 2.5 Inch
  • Outlet Outside Diameter: 2.5 Inch
  • Diameter: 2.5 Inch
  • Material: 409 Stainless Steel
  • Sold As: Kit
  • Warranty: Limited Lifetime
  • Stainless Steel Construction Resists Corrosion
  • Delivers The Ultimate In Sound And Performance
  • Provides Extra Punch In The Passing Lane
  • Fabricated Using The Highest Quality Materials
  • Ensures Maximum Exhaust Gas Flow Which Significantly Boost HP
  • Installation At Home Without Special Tools
  • Mandrel-Bent/All Welded/Built to Last
  • Does Not include Mufflers
  • Requires 18 inch Muffler Body For Proper Fit
  • Tailpipes Exit Out The Rear
About Pypes Performance Exhaust

One of the principal ways of getting a lot of bang for your performance buck is to replace your car’s compression-bent exhaust system with a mandrel bent system.  The simple fact is that a mandrel bent exhaust system will flow twice as efficiently as a compression-bent system and we all know that efficient flow is one of the main ingredients of power.

Pypes Performance Exhaust supplies complete mandrel bent, performance exhaust systems for American performance vehicles ranging from the 1950’s to the present day.  We also offer both gas and diesel truck systems for the most popular American Pick-Up Trucks!

Our systems and accessories are fabricated using stainless steel materials that will provide their owners with long term service and satisfaction……and, Pypes products are backed by our limited lifetime warranty!  Most of our systems include a custom designed X-Pipe at a considerably lower price than others that include no crossover at all or just a basic balance tube with their systems.  A typical Pypes’ “complete system” will include an X-Pipe, a pair of mufflers, a set of tailpipes and all of the clamps and hangers required to install the system.

Pypes also performance matches systems with a choice of their own distinct mufflers to best suit your horsepower and sound requirements, rather than forcing you to buy one type of technology that may not be best for your application.

Videos:

Vehicle Fitment:

The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
Make Model Submodel Years
Dodge 330 1963 - 1964
Dodge 440 1963 - 1964
Dodge Charger 500 1969 - 1971
Dodge Charger Daytona 1969
Dodge Charger R/T 1967 - 1971
Dodge Charger SE 1969
Dodge Charger Special Edition 1971 - 1974
Dodge Charger Super Bee 1971
Dodge Charger 1966 - 1974
Dodge Coronet 440 1965
Dodge Coronet 500 1965
Dodge Coronet Super Bee 1968 - 1970
Dodge Coronet 1965
Dodge Dart 270 1966 - 1968
Dodge Dart Custom 1969 - 1974
Dodge Dart Demon 340 1971 - 1972
Dodge Dart Demon 1971 - 1972
Dodge Dart GTS 1968 - 1969
Dodge Dart GT 1966 - 1969
Dodge Dart Special Edition 1974
Dodge Dart Special 1971 - 1974
Dodge Dart Sport 340 1973
Dodge Dart Sport 360 1974
Dodge Dart Sport 1973 - 1974
Dodge Dart Swinger 1969 - 1974
Dodge Dart 1966 - 1974
Dodge Polara 500 1968 - 1969
Dodge Polara Brougham 1971
Dodge Polara Custom 1970 - 1973
Dodge Polara Special 1970
Dodge Polara 1966 - 1973
Plymouth Belvedere Satellite 1968 - 1970
Plymouth Belvedere 1966 - 1970
Plymouth Fury Custom Suburban 1968 - 1974
Plymouth Fury Custom 1971
Plymouth Fury GT 1970
Plymouth Fury Gran Coupe 1970 - 1972
Plymouth Fury Gran Sedan 1972
Plymouth Fury Police 1974
Plymouth Fury S-23 1970
Plymouth Fury Sport GT 1970 - 1971
Plymouth Fury Sport Suburban 1968 - 1974
Plymouth Fury Sport 1966 - 1971
Plymouth Fury Suburban 1968 - 1974
Plymouth Fury VIP 1966 - 1969
Plymouth Fury 1966 - 1967
Plymouth GTX 1967 - 1971
Plymouth Road Runner 1968 - 1974
Plymouth Satellite Brougham 1971
Plymouth Satellite Custom 1971 - 1974
Plymouth Satellite Regent 1971 - 1974
Plymouth Satellite Sebring Plus 1971 - 1974
Plymouth Satellite Sebring 1971 - 1974
Plymouth Satellite Sport 1968 - 1970
Plymouth Satellite 1966 - 1974
Plymouth Superbird 1970

Specifications:

Diameter 2.5 Inch
Exhaust Tip included No
Exhaust Type Crossmember Back
Exit Position Dual Split Rear
Exit Style Straight
Hardware Included Yes
Includes Muffler No
Inlet Inside Diameter 2.5 Inch
Manufacturer Warranty Limited Lifetime
Material 409 Stainless Steel
Outlet Outside Diameter 2.5 Inch
Vehicle Type Car

Reviews:

Write a Review
* Your Name:
* Email (This will not be displayed)
* Rating:
Comments:

Ask a question about

Pypes Crossmember Back w/X-Pipe Exhaust System 66-74 Mopar B-Body Split Rear Dual Exit 2.5 in Intermediate And Tail Pipe Hardware Incl Muffler And Tip Not Incl Exhaust SMB10:
Moparts 2024