Important Update on US Tariffs and Pricing DETAILS ]

855.444.6872 Contact Us Mon-Sat 10a-6p
DRIVEN BY CARE

Redline Select® 2006-2022 Dodge / Ram Ball Joint Front Upper Right / Left Hand (with 14mm Stud)

Redline Select® 2006-2022 Dodge / Ram Ball Joint Front Upper Right / Left Hand (with 14mm Stud)
$42.57$75.99 ea
NEWIN STOCK16 Units in Stock7 Day Fulfillment Lead Time
Model: 5014746
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.
STANDARD
DELIVERY
STORE PICKUP
[More Info]
Front upper ball joint for 2006-2022 Dodge / Ram trucks and SUVs (fits both right and left sides) with a 14mm stud. This replacement ball joint secures the upper control arm to the steering knuckle, maintaining proper wheel alignment, steering response, and suspension geometry. Built for durability and reliable performance, it restores factory fit and function, reduces play and vibration, and helps prevent uneven tire wear. Designed for straightforward installation and long service life, it’s ideal for suspension restoration or routine maintenance.
Features:
  • Fits 2006-2022 Dodge / Ram models — front upper, right or left hand (14mm stud)
  • Direct-fit replacement for restoring factory suspension geometry
  • High-strength construction for durability and long service life
  • Precision ball stud and socket to reduce play and steering vibration
  • Helps prevent uneven tire wear and improves handling
  • Easy to install with common hand tools for most DIY repairs
Installation / Application:
  • Difficulty: 2/5
  • Estimated time: 45-90 minutes per side
Suggested Tools:
  • Jack and jack stands
  • Lug wrench
  • Socket set and ratchet
  • Torque wrench
  • Ball joint separator or pickle fork
  • Pry bar
  • Hammer
  • Needle-nose pliers
  • Penetrating oil
Instructions:
  1. Park on level ground, engage parking brake, and loosen wheel lug nuts slightly.
  2. Raise vehicle with a jack and secure on jack stands. Remove the wheel.
  3. Apply penetrating oil to the ball joint nut and stud area if needed.
  4. Remove the cotter pin (if present) and loosen/remove the ball joint castle nut.
  5. Use a ball joint separator or pickle fork to disconnect the ball joint stud from the steering knuckle; support the control arm to avoid stressing other components.
  6. Unbolt the upper control arm-to-frame fasteners if required to gain clearance, or use a pry bar to create room to remove the ball joint.
  7. Remove the old ball joint from the control arm. Clean mating surfaces and inspect control arm and knuckle for damage or excessive wear.
  8. Install the new ball joint into the control arm or knuckle per orientation; secure with the supplied nut and torque to the vehicle manufacturer’s specification.
  9. Reconnect any control arm bolts removed and torque to spec. Insert new cotter pin if applicable.
  10. Reinstall the wheel, lower the vehicle, and torque lug nuts to spec.
  11. Perform a final torque check on ball joint and control arm fasteners. Have wheel alignment checked and adjusted by a professional after replacement.
About Redline Select

Redline Restomotive® has established itself as a premier brand in the world of classic car restoration, providing enthusiasts with high-quality parts that meet the exacting standards of original manufacturer specifications. Dedicated to the preservation of American automotive history, Redline Restomotive® combines advanced manufacturing techniques with an in-depth understanding of vintage vehicles. The result is a range of products that seamlessly blend into the design and function of classic cars, giving restorers and collectors the assurance that each part reflects the era’s style, quality, and performance.

Redline Select®  is our premium line of steering and suspension products for all vehicle makes and models including both North American and Import vehicles.  We have partnered with an ISO 9001/QS9000/TS16949 certified manufacturing facility with more than 40 years of experience in producing components that perform to the standards our customers expect.  Our steering and suspension parts are backed by multiple quality control checks along the way—during production, prior to shipping from the factory, and at arrival. With our ISO 9001:2015 certification, we observe the world’s highest standards for quality management.  

Vehicle Fitment:

The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
Make Model Years Fitment Notes
Dodge Ram 1500 2009 - 2010 Crew Cab
Dodge Ram 1500 2006 - 2008 Extended Crew Cab
Dodge Ram 2500 2006 - 2010
Dodge Ram 3500 2006 - 2010 Standard Cab
Ram 1500 Classic 2019 - 2022
Ram 1500 2011 - 2018
Ram 2500 2011 - 2013
Ram 3500 2011 - 2012 Standard Cab

Specifications:

Aftermarket Reference K80630, K80628, K500344, FA2308, BJ81016, BJ81106, BJ81236, 536376, JBJ908, 610.67032, 5001134
Bearing Type POM
Boot Material CR
Castle Nut 1
Height (MM) 108
Housing Finish Mag/Phos or E-Coat
Housing Knurling Yes
Includes Cotter Pin 1
Mount Type Press-Fit
OE Reference 5174041AA, 5174041AB, 68227900AB, 68227900AC, 68227901AB, 68227901AC
Press Fit Diameter (mm) 46.75
Proposition 65 WARNING: This product may contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm.
Spring Clip 1
Stud Taper 1:6
Stud Thread (mm) M14x1.5
Stud Washer 1

Reviews:

Write a Review
* Your Name:
* Email (This will not be displayed)
* Rating:
Comments:

Ask a question about

Redline Select® 2006-2022 Dodge / Ram Ball Joint Front Upper Right / Left Hand (with 14mm Stud):