This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler Specs:
Shaft Size: 3/4" coarse spline with flat at bolt head side
Spline Count: 25
Total OD: 3-1/4"
Bolt Size: 5/16"
Bolt…
Engineered to meet or exceed OE specifications in fit, function and performance. Carefully manufactured from OE grade materials for strength and durability. Resistant to damage caused by corrosion and vibration.. Bolts, nuts and washers…
Ensure a secure seal for your power steering system with this power steering pump cap, designed for 1962-1999 vehicles equipped with Saginaw pumps. This factory-correct cap prevents fluid leaks and contamination, maintaining the optimal…
Repair torn and worn-out boots of suspension tie rod ends - without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5-point sealing action. Choose from four sizes and round or…
Engineered to meet or exceed OE specifications in fit, function and performance. Carefully manufactured from OE grade materials for strength and durability. Resistant to damage caused by corrosion and vibration.. Bolts, nuts and washers…
Each coupler replicates the original in every detail. A worn out steering coupling joint will cause your vehicle's steering to become loose or inconsistent. For 13/16" Shaft; 36 Spline; 3-1/4" Diameter
American Motors…
Adjusting sleeve (right/left hand, 11/16"-18NF) designed to restore correct tie-rod length, alignment adjustment, and secure steering linkage on a wide range of American and import cars and trucks (1953–2005). This heavy-duty…
Ensure optimal performance of your power steering system with this power steering pump cap, designed specifically for 1963-1982 Chevrolet Corvette models. This factory-correct cap provides a secure seal, preventing fluid leaks and…
Proforged applied the same technological advancements in ball joint construction to their line of Tie Rod Ends and Rack Ends, delivering a premium product to withstand the rigors of performance car and truck applications. The result is a…
Adjusting sleeve for steering linkage and tie rod assemblies, designed to provide precise toe alignment and secure connection between inner and outer tie rod ends. Compatible with a wide range of American and import vehicles from 1953…
Engineered to meet or exceed OE specifications in fit, function and performance. Carefully manufactured from OE grade materials for strength and durability. Resistant to damage caused by corrosion and vibration.. Bolts, nuts and washers…
This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is black phosphate coated for use with…
This coupler (rag joint) is required to connect the steering column to the steering box. Each steering coupler is manufactured to factory specifications and will replace the original on the vehicle listings below.
Steering Coupler…
Reproduction steering coupling joint for a variety of AMC, GM, Chrysler, Dodge, Plymouth, and Ford models as listed. This coupler (rag joint) is required to connect the steering column to the steering box. Additional Information
Technical…
Reproduction of the original steering column coupler components commonly known as the rag joint. These special components can be a weak link between the steering column and the steering gear box. Each set includes the correct replacement…
Upgrade or restore your classic GM power steering system with this reproduction power steering control valve, designed for 1958-64 Chevrolet Impala, Bel Air, Biscayne, 1960-68 Chevrolet and GMC trucks, 1963-82 Corvette, and 1962-67 Chevy…
On some factory applications, a flexible coupling or Rag Joint was used to attach the column to the steering box when there was perfect alignment. If the original column or box is changed, the stock coupling may not work. Borgeson offers…
Reproduction tie-rod adjusting sleeve for various 1957-2005 General Motors and AMC model vehicles. Each adjusting sleeve is manufactured to factory specifications replicating the original in quality, fitment and design. Restore vehicle…
Tie Rod End Dust Boot, Conical, Rubber, Black, 0.562 in. I.D., 1.500 in. Base O.D., Each
Brand:Dorman
Part Type:Tie Rod End Dust Boots
Product Line: Universal Tie Rod End Dust Boots
Tie Rod Dust Boot Shape:Conical…
On some factory applications, a flexible coupling or Rag Joint was used to attach the column to the steering box when there was perfect alignment. If the original column or box is changed, the stock coupling may not work. Borgeson offers…
A leak in your power steering system can make a mess of your engine compartment, your driveway and garage floor. You can also burn up your power steering pump by driving your classic when it is low on fluid. All power steering return…
Engineered to meet or exceed OE specifications in fit, function and performance. Carefully manufactured from OE grade materials for strength and durability. Hydraulically tested to ensure proper operation. Coated with a high-quality paint…
Proforged applied the same technological advancements in ball joint construction to their line of Tie Rod Ends and Rack Ends, delivering a premium product to withstand the rigors of performance car and truck applications. The result is a…
Proforged Tie Rod Sleeves are built from high quality materials to firmly connect the inner and outer tie rod ends, ensuring proper thread engagement and maintenance of alignment settings. Many popular sleeves are available in billet…
On some factory applications, a flexible coupling or Rag Joint was used to attach the column to the steering box when there was perfect alignment. If the original column or box is changed, the stock coupling may not work. Borgeson offers…
Engineered to meet or exceed OE specifications in fit, function and performance. Carefully manufactured from OE grade materials for strength and durability. Available in 16:1 ratio for spectacular handling. Coated with a high-quality paint…
(3770509). Single groove and 5-3/4" o.d. This pulley is made from formed and machined steel with the correct key way fit design, is finished in satin black and features correct markings as original. Camaro Applications 1967-1968 Chevrolet…
Borgeson Universal has now developed and is producing a modern quick 14:1 ratio power steering conversion box for the 1962-1979 Mopar cars with a 1-1/8" sector shaft. This Borgeson conversion box is a new modern power steering gearbox that…
If you're in the market to replace the worn out, damaged or missing power steering pump, choose this remanufactured power steering pump that is thoroughly remanufactured, carefully inspected and restored to OEM appear ance and…
These Unisteer rack and pinions are designed to provide precision steering for easier driving. They are made of cast aluminum with either a polished or chromed finish, depending on your application. The racks are also available in both…
Borgeson Universal has now developed and is producing a modern quick 14:1 ratio power steering conversion box for the 1962-1982 Mopar cars with a 1-1/4" sector shaft. This Borgeson conversion box is a new modern power steering gearbox that…
Reproduction of the original tie-rod adjusting sleeve designed for use with various GM, AMC, and Ford models. Manufactured to factory specifications replicating the original in quality, fitment and design. Restore vehicle handling, and OE…