The Precision Complete Weatherstrip Seal Kit CWK 3110 78 is a full exterior weatherseal solution designed for vehicle restoration and maintenance. It replaces worn or damaged door, trunk and body seals to prevent water intrusion, wind noise and heat/cold transfer. Made to match original profiles and manufactured from durable, weather-resistant rubber compound, this complete kit restores proper sealing, improves cabin comfort and protects interior components from moisture and corrosion. Verify CWK 3110 78 fitment for your specific year, make and model before purchase.
Features:
- Durable EPDM-style rubber construction resists UV, ozone and temperature cycling.
- Complete seal kit replaces worn exterior weatherstrips to stop leaks and reduce road noise.
- Profiles are designed to match original sealing surfaces for proper fit and function.
- Helps prevent interior water damage, trim corrosion and HVAC inefficiency.
- Ready-for-restoration solution — ideal for classic vehicle rebuilds and maintenance.
- Easy to trim and install with common hand tools; adhesive-ready backing on select pieces.
Installation / Application:
- Difficulty: 2/5
- Estimated time: 1–2 hours (typical for one side/area)
Instructions:
- Confirm kit CWK 3110 78 matches your vehicle application and lay out all pieces to identify locations.
- Carefully remove old weatherstripping and any retained adhesive or clips; use trim tool to avoid damaging metal.
- Clean the sealing channels and mating surfaces thoroughly with alcohol or an appropriate cleaner; allow to dry.
- Test-fit each new seal piece without adhesive to ensure correct orientation and length; trim excess as needed using a sharp utility knife.
- If required, apply primer to bare metal per primer manufacturer instructions and allow to flash.
- Apply weatherstrip adhesive evenly to the channel or to the bulb/contact area as the kit or adhesive manufacturer recommends.
- Position the new seal starting at one end and press into the channel firmly; use masking tape or clamps to hold sections in place during cure if necessary.
- Roll or press the seal along its length with a rubber roller or by hand to ensure full contact and a watertight fit.
- Allow adhesive to cure per the adhesive manufacturer’s specified time before closing doors, trunk or driving.
- Reinstall any trim pieces or hardware removed during disassembly and perform a final inspection for gaps, pinched areas or improperly seated sections.
About Precision Replacement Parts
Since 1986 Precision Replacement Parts has been a trusted name in the Automotive Glass Industry.
Our knowledge and experience in manufacturing millions of extruded and molded EPDM Rubber, PVC and HDPE based plastics, and various stamped and extruded metal products for the classic and late model industries has allowed Precision to expand our services into multiple product markets.
Along with our own USA based production facility, Precision also partners with 25 different manufactures worldwide with a reputation as a global leader supplying OEM and replacement products to a number of different industries. Our partnerships along with our own in-house manufacturing and fabrication capability gives Precision a unique position in helping to meet the expanding needs of customers everywhere, providing them with a sustained competitive advantage.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
| Make |
Model |
Years |
| Dodge |
D100 |
1978 - 1979 |
| Dodge |
D150 |
1978 - 1979 |
| Dodge |
D200 |
1978 - 1979 |
| Dodge |
D300 |
1978 - 1979 |
| Dodge |
D400 |
1978 - 1979 |
| Dodge |
D450 |
1978 - 1979 |
| Dodge |
W150 |
1978 - 1979 |
| Dodge |
W200 |
1978 - 1979 |
| Dodge |
W300 |
1978 - 1979 |
